GPS time clock

Hours you can trust, stamped on the jobsite

Techs clock in and out on the job from their phone, DayReport records the location and the time at both ends, and the shift lands on the timecard the moment they clock out.

7 day free trialNo card to startAdmins and office staff free

DayReport on an iPhone, clocked in at 6:49 PM on a jobsite with the clock in location recorded and a Clock out button.

Screens show example data.

  • Built by a working integrator
  • 7 day free trial, no card
  • Admins and office staff free
  • Data stored in the United States
How it works

Clock in, work, clock out. The math is done

A tech picks the job and taps Clock in. DayReport records the location and the time, and the time comes from the server, not the phone, so it cannot be changed on the device.

  • Write up the day, add photos and materials while clocked in.
  • When they tap Clock out, the location and time are recorded again and the hours are rounded to the quarter hour.
  • The shift is saved to the timecard right away. The write-up can be finished later from History.
Locked hours

Clocked hours stay the way they were clocked

The hours, job, date and work type on a clocked entry come from the clock, and the technician cannot change them. An admin can correct a clocked entry, but a reason is required.

  • The change shows on the timecard as Corrected by admin, beside the original clocked hours.
  • Breaks on a GPS shift are timed by DayReport and taken off the clocked hours.
  • A shift over 14 hours lands as Submitted so the office checks it before payroll.
DayReport on an iPhone, clocked in at 6:49 PM on a jobsite with the clock in location recorded and a Clock out button.
GPS, typed or both

Pick the policy that fits your crews

Each company chooses: GPS clock only, typed hours only, or let each tech choose. Typed hours use quick picks (4, 6, 8, 10 and 12 hours) and are just as fast on a phone.

  • Start and end times with an unpaid break work out the hours for you.
  • Typed times count in your company's time zone, or the office's, so a night shift on the night the clocks change pays the hours really worked.
  • Your company can take a meal break off long shifts automatically.
  • Office and training time without a job, counted toward weekly overtime unless you turn that off.
  • Foremen can log the day for the whole crew with Log for crew.

Where:SettingsCompanyTime tracking

Timecards and pay rules

A timecard that follows your rules

Weekly and daily overtime thresholds, overtime and double time multipliers, Saturday and Sunday rules, shift premiums and travel pay are company settings. Every timecard follows them.

  • Techs sign their timecard with a finger and tap Send week to share the timecard, expense report and receipts together.
  • Pay schedules every week, every 2 weeks, twice a month or monthly. Overtime is figured week by week.
  • Shift premiums count in the regular rate for overtime, as federal law requires.
  • Payroll export builds the file for Gusto, ADP RUN or Paychex Flex.
Clock rules

Rules for the clock, each one off until you want it

Admins set three optional rules on Settings, then Company, then Clock rules. The location is still read only when someone clocks in and when they clock out, never in between.

  • Clock in at the job: Flag holds a shift that starts or ends away from the job for the office, with the distance. Block refuses a clock in away from the job. A clock out is never refused.
  • Auto clock out closes a forgotten shift after 8 to 16 hours, or at a set time in each person's time zone. The entry waits on Approvals and the person is told.
  • Overtime alerts tell a person once a week when they are close to overtime, using your own pay rules, and tell admins and office managers who is close.
  • Each job gets its map location from its address, or from the phone of someone standing on site, with its own radius if it needs one.

Where:SettingsCompanyClock rules

Kiosk mode

A time clock on the wall at the shop

Pair a shared tablet once with a code from Team, then Kiosks. People type their own PIN, see their name and today's hours, then tap Clock in, Start break, End break or Clock out.

  • The tablet never signs in to DayReport, and nobody can read a PIN, admins included.
  • Pick the jobs people can clock into at each kiosk: Office, Training or any active job.
  • Kiosk shifts land on the timecard like any clocked shift, and the write-up is added later from History.
  • Five wrong PINs in five minutes lock the kiosk for five minutes. It works only with a connection.
FAQ

Questions people ask first

Can a technician edit their hours after clocking out?

No. Clocked hours, job, date and work type are locked. The tech can edit the write-up, photos and materials any time from History. An admin can correct the time with a recorded reason.

Does the GPS clock track techs all day?

No. DayReport records the location at clock in and clock out only. It does not follow the phone during the shift.

What about lunch?

On a GPS shift the tech taps Start unpaid break and End break, and the break comes off the clocked hours. Your company can also take a break off long shifts automatically.

What if someone forgets to clock out?

They get a reminder if they are still clocked in late. A GPS shift over 14 hours lands as Submitted instead of Approved, so the office checks it before payroll. Turn on auto clock out and a forgotten shift is closed after the hours you set, or at a set time, and waits for the office to check.

Can we stop clock ins away from the job?

Yes, if you want to. Give each job a map location and pick Flag or Block under Clock rules. Flag lets the clock in through and holds the shift for the office with the distance. Block refuses a clock in away from the job and tells the person how far away they are. A clock out is never refused, and the Office and Training jobs are never checked.

Does every tech need a phone to clock in?

No. Pair a shared tablet at the shop as a kiosk and people clock in, take a break and clock out there with their own 4 to 6 digit PIN. The tablet never signs in to DayReport, and it needs a connection.

What if the tech forgets to submit after clocking out?

Nothing is lost. The shift is saved to the timecard at clock out, and the write-up can be added later from History.

What about the night the clocks change?

GPS shifts are timed by the server, so they are right either way. Typed night shifts are paid for the time really worked: 9 hours for 10 PM to 6 AM on the night the clocks go back, and 7 on the night they go forward, using your company's time zone, or the office's if you have more than one.

How much does DayReport cost?

$19 per technician or foreman per month. Admins, office managers, project managers and accountants are free unless you give one a field seat to log their own time. 7 day free trial, no card to start.

Start today

Try it on your next job

Set up your company, invite a technician and log a real day. Setup takes about ten minutes, and the first 7 days cost nothing.

No card to startAbout ten minutes to set upCancel any time